Table of contents: Pumping oil from a gasoline engine… ↓ Draining Oil from a Gasoline Engine… ↓ Oil extraction from diesel engines… ↓ Draining oil from diesel engines… ↓
Instructions: Change the oil when it is warm.
Pumping oil from a gasoline engine AUA
Unscrew the screw plug "arrow" at the back right next to the toothed belt. Insert the probe into the dipstick guide tube to pump out the oil. After pumping out, screw the screw plug back in.
Draining Oil from a Gasoline Engine AUA
Remove sound insulation.
Loosen the oil filter using the Hazet "2171-1" clamp or the "SW 30" open-end wrench and remove the oil filter. Loosen the oil drain plug. Clean the surface of the filter adjacent to the engine. Lightly lubricate the rubber seal with oil. Screw in and tighten the new filter. Screw in the oil drain plug with a new sealing ring. Oil filter: 20 Nm. Oil drain plug: 30 Nm. Fill with oil.
Oil extraction from diesel engines ANY, AMF, ATL
Remove the oil dipstick. Disconnect the oil dipstick tube "1". Insert the probe into the dipstick guide tube to pump out the oil. After pumping out, reinstall the oil dipstick guide tube.
Draining oil from diesel engines ANY, AMF, ATL
Unscrew the "arrow" cover using the "SW 36" socket wrench and remove the cover with the oil filter element. Remove the used filter element from the cover. Do not allow foreign objects to enter the oil filter housing. Replace the cover sealing ring. Insert a new filter element. Tighten the cover. Cover tightening torque: 25 Nm.