Front brakes
Production number (Pr.- Nr.) | ON | 1U |
Stopping support | FBC-60.16" | FBC- 60.17" |
Ventilated brake. disc 0 mm | 320 | 345 |
Brake disc, thickness I (mm) | 30 | 29.5 |
Brake disc, wear limit (mm) | 28 | 27.5 |
Brake caliper, piston (mm) | 60 | 60 |
Pad thickness with back and damping plate (mm) | 19.2 | 19.2 |
Brake pad wear limit with back and damping plate (mm) | 7 | 7 |
Rear wheel brake
Production number (Rg.-Nr.) | 1KW | 1KE |
Stopping support | SP-43 ERV. 16" | SP-43 ERV. 17- |
Brake disk (mm) | 300 | 330 |
Brake disc, non-ventilated, thickness (mm) | 12 | - |
Brake disc, ventilated, thickness | - | 22 |
Brake disc, wear limit (mm) | 10 | 20 |
Brake caliper, piston (mm) | 43 | 43 |
Pad thickness with back and damping plate (mm) | 17.5 | 17.5 |
Brake pad wear limit with back and damping plate (mm) | 7 | 7 |
Which brakes are installed on the vehicle is indicated by the corresponding number PR -A and B- on the vehicle data plate.
When performing repair work on the brake. system on the brake friction surface. disks are often found to be thin ("hair") scratches. Thin scratches up to 10 mm in length are not a technical defect and are not grounds for replacing the brakes. disks. Brake discs and pads with through scratches on the friction surface must be replaced.
Visitor comments