Rear-view mirror with mechanical adjustment
1. Remove the door trim panel.
2. Loosen the fixing screws and remove the mirror.
3. Installation is carried out in the reverse order of removal. The figure shows the location of the mirror adjustment screws.
Electric Rear View Mirror
Audi 100 models
1. Fold up the trim panel. Unscrew the mounting screws, disconnect the connection connector and remove the mirror.
2. Installation is carried out in the reverse order of removal.
Audi A6 models
1. Remove the interior trim panel.
2. Loosen the fixing screws (arrows) and remove the mirror by unplugging the connector.
3. Installation is carried out in the reverse order of removal.
Mirror glass
1. Turn the mirror up and pry out the bottom edge of the mirror with a screwdriver. Remove the glass carefully. Disconnect the connector.
2. Installation is carried out in the reverse order of removal.
Electric drive motor
1. Remove glass.
2. Loosen the mounting screws and remove the motor. Disconnect the connector.
3. Installation is carried out in the reverse order of removal.
Visitor comments