Table of contents: Removal ↓ Installation ↓
Removal
Remove the servo spring. Disconnect the drive rod/master cylinder from the clutch pedal as follows: insert the "T10005" pliers into the recesses of the clutch pedal.
Compress the "arrow" fastening and disconnect the clutch pedal from the master cylinder.
Unscrew nut "A". Unscrew the screw so that the clutch pedal can be removed.
Installation
Installation is in reverse order, taking into account the installation of the servo spring.
Fastening "A" should be on the drive rod "B" of the master cylinder. To fix, press the clutch pedal in the "direction of the arrow", while paying attention to the correct fixation.
The article was copied from the website AudiManual