Withdrawal
Remove poly V-belt.
Unscrew bolt for poly V-belt pulley and toothed belt sprocket, then secure poly V-belt pulley with support -3415- with pin -3415/1-. Unscrew the bolt and remove the V-ribbed belt pulley.
Carefully! Risk of engine damage. In order to prevent the belt drive pulley on the crankshaft from slipping off the drive pulley, it is forbidden to turn the crankshaft when the V-ribbed belt pulley is loose. To secure the toothed belt gear for the crankshaft, screw in the bolt with 2 washers again.
Installation
Install in reverse order, replacing the V-ribbed belt pulley bolt.
Position poly V-belt pulley so that the notch in the pulley aligns with the connecting rod on the toothed belt sprocket -arrow-. Install poly V-belt.
Visitor comments