Sealing of a lift and slide hatch (Audi A2)

1. Lower sealing strip. Replace
2. Outer guide seal. Replace
3. Foil strip. Replace. Adhesion area: in the fold area from the front edge of the trunk door almost to the height of the front edge of the crossbar panel (length approx. 35 mm)

Replacing the guide with a cable traction

The sunroof frame has been removed. The sliding sunroof drive motor has been removed. Replace the gaskets damaged during dismantling, and install the removed ones in their original place.

(This article was copied from the website AUDIMANUAL)

The article was checked by auto expert Daniil Ushakov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Audi A2: Doors, locks and windows

Removal the lift-and-slide sunroof
Removal and installation a lift-and-slide sunroof
Rear Door and Rear Door Mounting Bracket Seal
Removal and installation the rear door inner seal

Removal the rear cover of the sliding and tilting sunroof
Removal and installation the guides of the lift-and-slide sunroof
Installing the rear cover of the sliding and lifting sunroof
Installation of a lift and slide hatch