Table of contents: Front sensors ↓ Rear sensor ↓
Front sensors
1. Remove the wheel and front wheel arch liner (see Chapter 10).
2. Disconnect the connector (1 in the illustration), unscrew the bolt (2) and remove the sensor (3).
22.2. Front body acceleration sensor mounting parts.
3. Installation is carried out in reverse order. Tighten the bolts to 8 Nm.
Rear sensor
4. Remove the luggage compartment floor covering and the compressor located on the left. If equipped, remove the third row of seats.
5. Disconnect the connector (3 in the illustration), unscrew the bolt (1) and remove the sensor (2).
22.5. Rear body acceleration sensor installation details.
6. Installation is carried out in reverse order. Tighten the bolt to 8 Nm.