Removal the front wheel arch liner 1. Mudguard. Removal: remove the axle joint trim. Turn the front wheel, respectively, until it stops. Unscrew the bolts under the mudguard. Press the retainers off the clamps, for example, with a small screwdriver and insert the clamp from the side of the mounting bolts. Remove the wheel arch liner from the front wing retainers and pull it down. Installation: in reverse order; 2. Bolt 2 Nm; 3. Clamp. 7 pcs. After removing the fender liner, replace the clips; 4. Expansion piston; 5. Wheel spoiler; 6. Bumper trim
Drive shaft cover 1. Drive shaft lining; 2. Mudguard; 3. Spar; 4. Drive shaft; 5. Nut. 2 Nm
(This article was copied from an online resource «AUDImanual»)