Oil pan (ADR)
Withdrawal
1. Raise and secure the front of the vehicle.
2. Remove the bottom engine cover.
3. Drain the engine oil and remove the dipstick.
4. Mount the engine on a lift.
5. Remove the transmission front cover.
6. Tighten the lower engine mount nuts.
7. Place a jack under the front suspension cross member, remove the bolts and lower the cross member slightly.
8. Remove the pan bolts.
9. Remove the tray.
Installation
Clean the surfaces of the sump and cylinder block and install a new gasket. Installation is carried out in the reverse order of removal.
Visitor comments