Hydraulic clutch drive system:
1. Brake fluid reservoir
2. Hose
3. Clamp for removing the line, remove the clamp as far as it will go
4. Master cylinder
5. Nut, 28 Nm. Self-locking, always replaceable
6. Capture. Replace only with master cylinder removed
7. Clutch pedal
8. Bolt, 28 Nm, 2 pieces
9. Washer, put on the pipe connection, install with brake fluid
10. Pipe-hose line, disconnection from the master cylinder
11. The bracket is fixed on the body
12. Bolt, 23 Nm
13. Clamp, to remove the line, remove the clamp until it stops
14. Breather valve, bleed the clutch assembly
15. Cap
16. Slave cylinder, after installation, adjust the gearshift mechanism
Visitor comments