Upholstery and cushion of the backrest of the split rear seat (Audi A2)

1. Upholstery. Remove the rear seat. Unlock the back of the rear seat. Remove the screen release handle upwards. Remove the screen release lock. Press the edging "2" along the perimeter with a flat screwdriver
2. Edging
3. Seat back cover

1. Upholstery. Remove headrest "3" by pressing the button on the left guide "4". Remove headrest guide "4". Remove cushion "1" with upholstery. Disconnect clips "6" from cushion "2". Cut wire clips "5" and remove seat upholstery. Installation: Use staple pliers to install new wire staples "V.A.G 1634/". For more convenient installation, move the longitudinal rods back to the first cross rod. When installing, fasten the cross rods first with clamps, then the longitudinal rods
2. Pillow
3. Headrest. The rear outer headrest is not identical to the front headrest. When removing any headrests, mark the headrests with adhesive tape
4. Headrest guide
5. Wire staples
6. Staples Standard, according to the tacker manufacturer's data. Use only the tacker for pillow staples