Switch
Function selection switch (arrow) and reset button (Reset) are located in the windshield wiper lever handle.
The functions are displayed with the ignition on by pressing the upper and lower sides of the function selection switch in turn.
In addition, a speed warning is set with the function selection switch.
By pressing the Reset button for no more than 1 s set the following functions:
- travel time;
- average fuel consumption;
- instantaneous fuel consumption.
In addition, the travel time function can be interrupted by short key presses.
The digital display connects on demand at the touch of a button Reset in the instrument cluster.
When the ignition is turned on, the function that was selected before the ignition was turned off is activated.
If the battery is disconnected, all functions are cancelled.
Display
The on-board computer displays the following information:
- instantaneous fuel consumption;
- maximum mileage;
- travel time (maximum possible 23:59);
- average fuel consumption;
- average speed of movement.
l/100 km – instantaneous fuel consumption is given in l/100 km and is calculated on sections of 30 m.
If this parameter is selected after the engine has started, it is displayed after 30–40 m of travel.
km – the maximum driving distance is shown every 10 km of the vehicle's mileage and indicates the distance that can be traveled on the fuel remaining in the fuel tank (power reserve) with the same driving style.
When calculating the maximum travel distance, the fuel consumption for the last 30 km of the journey is taken as a basis.
h – travel time, which has passed since the last "zeroing" of the function. When the ignition is turned on, the travel time is summed up.
Maximum travel time is 23 hours 59 minutes.
To set the "travel time" function to zero, you must press the button Reset.
After 2 hours of continuous driving, the computer switches from any function to the "travel time" function to automatically display the parameter. If the ignition remains on or off for less than 10 minutes, the "travel time" function will automatically turn on every 2 subsequent hours in – 4:00, 6:00, etc.
If the ignition is switched off for more than 10 minutes, the values of the "travel time" function are cancelled.
l/100 km – average fuel consumption shown in l/100 km.
The average fuel consumption since the last time the function was "reset" is shown.
When the ignition is switched off, the average fuel consumption remains in memory and is calculated on subsequent trips taking into account previous trips.
To set the "Average fuel consumption" function to zero, you must press the button Reset.
When calculating average fuel consumption, the fuel consumption for the first 30 m of the journey is taken as a basis.
km/h – average speed, achieved since the last "zeroing" of the function.
When the ignition is turned off, the average speed remains in memory; on subsequent trips it is calculated taking into account the speed of previous trips.
To set the "Average speed" function to zero, press the button Reset.