Table of contents: Removal ↓ Installation ↓
Removal
1. Raise and support the front of the vehicle.
2. Remove the lower engine shield.
3. Drain the engine oil and remove the dipstick.
4. Secure the engine to the lift.
5. Remove the front gearbox cover.
6. Remove the lower engine mount nuts.
7. Place a jack under the front suspension crossmember, remove the bolts and lower the crossmember slightly.
8. Remove the pan bolts.
9. Remove the tray.
Installation
Installation is carried out in the reverse order of removal.
Clean the surfaces of the oil pan and cylinder block and install a new gasket.