Inspection, installation and repair work may only be performed by trained specialists. When connecting the pretensioner, all mechanical parts, including the 3-point seat belt, must be correctly secured. Do not open or repair seat belt pretensioner parts; always use new parts only. It is not allowed to install seat belt pretensioners on vehicles that have been dropped from a height of more than 50 cm from the surface. Seat belt pretensioners with mechanical damage (chips, cracks) are subject to mandatory replacement. The pretensioner module must be installed immediately after it has been removed from the transport container. The pretensioner unit must not be treated with grease, cleaners or similar agents.
[The original article is available on the online resource AudiManual]
Safety precautions when handling pyrotechnic pretensioners (Audi A2)
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Share information:
Previous articles
Audi A2: Safety system
Next articles
Similar articles on other Audi car models:
Vehicle traffic safety Audi 80 B3 (1986-1991, petrol)
Safety precautions when working with the ignition system Audi 100 C4 (1990-1994, petrol)
Safety precautions to avoid damage to the catalytic converter Audi A3 Type 8L (1996-2003)
General information and safety precautions Audi A4 B6 (2000-2006)
Description of electrical equipment and safety precautions Audi A6 C4 (1994-1997)
Safety requirements and warnings Audi A8 D2 (1994-2002)
General information and safety precautions: power supply system Audi Q7 Typ 4L (2005-2015, diesel)
Vehicle traffic safety Audi 80 B3 (1986-1991, petrol)
Safety precautions when working with the ignition system Audi 100 C4 (1990-1994, petrol)
Safety precautions to avoid damage to the catalytic converter Audi A3 Type 8L (1996-2003)
General information and safety precautions Audi A4 B6 (2000-2006)
Description of electrical equipment and safety precautions Audi A6 C4 (1994-1997)
Safety requirements and warnings Audi A8 D2 (1994-2002)
General information and safety precautions: power supply system Audi Q7 Typ 4L (2005-2015, diesel)
Link to this page in different formats
Visitor comments
No comments yet
- General information
- Introduction to the guide
- Maintenance
- Engine 1.4 l (gasoline)
- Engine repair
- Lubrication system
- Cooling system
- Exhaust system
- Engine 1.6 l (gasoline)
- Engine repair
- Lubrication system
- Cooling system
- Exhaust system
- Engine 1.2 l (diesel)
- Engine repair
- Lubrication system
- Cooling system
- Injection and turbocharging
- Engine 1.4 l (diesel)
- Engine repair
- Lubrication system
- Cooling system
- Turbocharging system
- Supply system
- Fuel injection system
- Exhaust system
- Transmission
- Mechanical gearbox 02J
- Mechanical gearbox 02T
- Mechanical gearbox 085 DS
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Seats
- Doors, locks and windows
- Safety system
- Heating and air conditioning
- Electrical equipment
- Power devices
- Equipment and devices
- Wipers and washers
- Lighting and lamps
- Breakers and switches
- Electrical circuits