Withdrawal
Remove the engine hood. Detach resonator on air duct hose -arrow 1-; to do this, remove release tabs. Remove air duct; to do this loosen spring clips -arrow 2- with hose clip pliers -VAG 1521-.
Position crosshead -10.222 A- on wing joint edges. The lead screw is located at the back. Attach snap hook -10.222 A/11- to right engine eye. Pre-clamp the engine with a screw, do not lift. Unscrew nut -3- only after replacing engine mounting. Remove bolts -1- and -2- and remove bracket with engine support.
Installation
Installation in reverse order.
Visitor comments