1. Upper B-pillar trim. Bolt "2" is only available on cars with an upper Airbag. Remove the B-pillar screen. Remove the upper end. Unscrew screw "2". Unscrew the upper seat belt mounting point. Remove the lower B-pillar trim. Pull trim "1" down from clamps "4" (2x)
2. Bolt, tightening torque 4 Nm. Only for cars with upper Airbag
3. Guide mandrels (2 pcs.)
4. Clamps (2 pcs.).
5. Airbag label. The Airbag label is firmly welded to the trim
(The original article is posted on the resource: «AUDIMANUAL»)