Table of contents: Removal ↓ Installation ↓
Body B pillar trim
Removal
1. Remove the door seal –3– in the area of the trim –2–.
2. Drill the heads of the rivets –1–.
3. Remove the visor with brackets from the sliding window –4–.
4. Remove the visor.
Installation
1. Place the canopy with brackets as shown in the illustration on the retractable window.
2. Install new rivets using, for example, HAZET 1963.
3. Replace the door seal where it was removed.
(The original article is located on the online resource: «AudiManual»)