Remove the solenoid valve 1 of the absorber "N80" pos. "1" with the bracket from the air duct. Remove the air duct "2", for this purpose loosen the spring clamps with pliers for hose clamps "V.A.G-1921" "arrows".
Install the crossmember "10. 222 A" on the connecting edges of the wings. The lead screw is located at the rear. Hang the hook-carabiner of the spindle "10. 222 A /11" on the right eye of the engine. Preliminarily clamp the engine with the lead screw, do not lift. Unscrew the nut "3" only after replacing the engine mount. Unscrew bolts -1. and "2" and remove the console with the engine support.
Installation in reverse order.
The original material is located on the website AUDIMANUAL.ru