Table of contents: Removal ↓ Installation ↓
Removal
Remove the steering column switch. Disconnect the connector of the reading coil. Disconnect the connector "1" of the ignition switch. Remove the threaded varnish from both mounting screws "arrows". Slightly unscrew the mounting screws "arrows" and remove the ignition switch from the housing "2" of the steering shaft lock.
Installation
Installation is in the reverse order, making sure that the ignition switch and the lock cylinder are in the same position during installation, e.g. Zuendung EIN/"Ignition ON". Secure the fastening screws "arrows" to the housing "2" of the steering shaft lock with threaded varnish. Install the steering column switch illustrations.
Distribution of ignition and starter switch contacts
15. Terminal 15
30. Terminal 30
50. Terminal 50
50b. Terminal 50b
75. Terminal 75
86s. Terminal 86s
R. Parking
A link to the original source is available on the website: audimanual.ru