Turn off the ignition and remove the ignition key. Set the light switch to position "0". Remove the hood. Unlock the wire clip "arrow" and remove the housing cover "1" from the headlight housing. Disconnect the connector "3" of the low beam bulb. Unclip the wire clips "1" and remove the bulb "2" from the housing.
Installation is in reverse order, in this case it is necessary to install a new incandescent lamp in the housing, while not touching the glass bulb of the lamp with bare hands. Fix the incandescent lamp with a wire fastening clip. Reconnect the plug connector and close the housing cover. Fix the housing cover with a wire clip.
(The text is based on materials from the website AUDIMANUAL.ru)