Tie rod ends — checking for play, fastening and covers (Audi A2)

Instructions: The car must be raised for inspection (the wheels are hanging).

Instructions: The car must be raised for inspection (the wheels are hanging).

Check the play by shaking the steering rods and wheels. No gap is allowed. Check the reliability of the lock nut "1" with a tightening torque of 50 Nm. Check the dust boots "arrow" for damage and correct fastening.

The article was checked by auto expert Daniil Ushakov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Audi A2: Car suspension

Front suspension — general information

Rear suspension — general information
Suspension arm assembly, hub bearing housing, stabilizer (ANY)
Suspension arm assembly, hub bearing housing, stabilizer (AUA,…
Tripod Drive Shaft (AMF, BHC)

Similar articles on other Audi car models:
Checking the play in the steering Audi 80 B3 (1986-1991)
Checking the dust covers and play of the tie rod ends Audi 100 C4 (1990-1994, petrol)
Checking the condition of the protective covers of the drive… Audi A3 Type 8L (1996-2003)
Checking the dust caps and clearance in the tie rod ends Audi A4 B5 (1994-2001, petrol)
Checking the oil level and filling Audi A6 C5 (1997-2004)
Checking the exhaust system Audi A8 D2 (1994-2002)
Timing chain covers, valve 1 of timing phase adjustment «N205» Audi Q5 Type 8R (2008-2017)

Link to this page in different formats

HTMLTextBB Code

Visitor comments

No comments yet

Audi A2(1999-2005)