Table of contents: Low/mid/high frequency speaker ↓ Full range loudspeaker ↓
Low/mid/high frequency speaker
1. Remove the door trim, refer to subsection Removal and installation door trim.
2. Carefully remove the damping mat from the back of the trim –1–.
3. Disconnect the speaker connector.
4. Remove the 3 T20 Torx screws from the subwoofer –2– and lift the speaker out of the trim.
5. Remove the T20 Torx screw from the midrange/high frequency speaker –4– and lift the speaker out of the trim. 3 – Telephone speaker.
6. Installation is performed in the reverse order of removal.
Full range loudspeaker
1. Remove the side trim from the rear, refer to subsection Removal and installation rear side trim.
2. Disconnect connector –1–.
3. Remove the 3 T20 Torx screws from the full-range speaker –2– and lift the speaker out of the trim.
4. Installation is performed in the reverse order of removal.