Table of contents: Adjusting the position of the front… ↓ Adjusting the position of the front… ↓
Adjusting the position of the front bumper in the shock absorber
Fig. 3.2–1. Location of the screw securing the left ventilation grille
Loosen the screws securing the left and right bumper ventilation grilles and remove the grilles (see Fig. 3.2–1).
Fig. 16–2. Fastening the front bumper (2) to the shock absorber (3): 1 – bolt
From below the bumper, unscrew the bumper mounting bolts (see Fig. 16–2).
Fig. 16–5. Adjusting the position of the front bumper in the shock absorber: 1 – bolt; 2 – bracket; 3 – shock absorber; 4 – threaded sleeve; 5 – socket wrench; 6 – bumper reinforcement
Insert socket wrench 5 (Fig. 16–5) through the opening for the ventilation grilles into threaded sleeve 4 of shock absorber 3.
By turning the threaded sleeve 4 in the shock absorber 3 in one direction or another, adjust the position of the front part of the bumper in height.
Screw in the bumper mounting bolts.
Install and secure the ventilation grilles.
Adjusting the position of the front bumper in the bracket
Unscrew bolt 1 (see Fig. 16–5) securing the side bumper bracket by several turns.
Adjust the position of the side parts of the bumper in relation to the front fenders by moving bracket 2 forward or backward.
Tighten the side bumper bracket mounting bolt.
[This article was copied from the website AUDIMANUAL]