Removal and installation the trunk door trim (Audi A2)

Lower trim. Start work from the side of the handle cover. Open trim "1" with a screwdriver (place the screwdriver near clamp "2" of clamps "2" (9x)

1. Left side cladding
2. Clamps
3. Upper trim. Unclip trim "3" on clamps "4" (3x). Carefully bend trim "3" and remove trim "3". Install in reverse order
4. Clamps

The right and left side trim is disassembled. Unclip the side trim "1" on the clips "3" (3x). When installing, first insert the locking latches "4"

2. Side trim on the right. Trim on the right and left sides disassembled. Unclip side trim "2" on clamps "5" (3x). When installing, first insert locking latches "6"
3. Clamps
4. Latch
5. Clamps
6. Latch

(This article was copied from the website: «AudiManual.ru»)

The article was checked by auto expert Daniil Ushakov

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

Audi A2: Interior

Left and right supporting part of the trunk
Side trim of the trunk
Trunk floor trim
Removal and installation the rear screen trim tension belt

Removal the seat console trim
Removal and installation the front carpet
Removal the lower steering column trim
Removal and installation the rear floor mat