1. Side trim of the center console on the right. Using a slotted screwdriver, remove cap -3-. Remove screw -2-. Grasp clips -4- under side trim -6- and remove side trim. Remove side trim -1- with Velcro strip -arrow-. Pull out the side trim -1- under the glove box
2. Bolt. Tightening torque 4 Nm.
3. cap
4. Clips (4 things.)
5. Clips (4 things.)
6. Side trim of the center console on the left. Using a slotted screwdriver, remove cap -8-. Remove screw -7-. Grasp clips -5- under side trim -6- and remove side trim -6-. Remove side trim -6- with Velcro strip. Pull out the side trim -6- under the storage compartment on the driver's side
7. Bolt. Tightening torque 4 Nm.
8. cap
Visitor comments