The gearbox is a complex unit, therefore it is recommended to repair it at branded service enterprises. When removing and installing many parts, it is necessary to measure the clearances and, if necessary, adjust them using the appropriate shims and washers. If the gearbox is defective or runs with a lot of noise, it is advisable to entrust its repair to a specialist or replace the gearbox, which can be much cheaper. However, some of the gearbox malfunctions can be eliminated without removing it from the car.
Despite all the difficulties, an experienced specialist can repair the gearbox even in a garage, having a special tool and doing the job sequentially, step by step, noting the operations performed. When repairing the gearbox, it is necessary to use special circlip pliers, bearing pullers, an inertial hammer, a set of punches, a micrometer and a hydraulic press.
Before removing the gearbox, try to determine the gearbox malfunction as accurately as possible, which will greatly facilitate repairs in the future.
Visitor comments