Fig. 18–59. Using a screwdriver to separate the base of the interior door handle from the door trim
Using a screwdriver blade as a lever, separate the base of the interior handle from the door trim and remove it (Fig. 18–59).
Fig. 18–60. Location of screws (3) for fastening the upper section of the trim (2) with switches to the door trim (1)
Through the opened hole, unscrew the two screws securing the upper section of the overlay with switches (Fig. 18–60).
Lift the rear of the upper section of the switch trim and pull it back to remove the front section from the door trim. Disconnect the electrical connectors from the switches.
Fig. 18–61. Location of the fasteners (1) and the direction (A) of removal of the switch (2) for adjusting the mirror position. Left: Location of the four fasteners (arrows) and the direction of removal (B) of the window lift switches
Move the two locks 1 (Fig. 18–61) to the right and at the same time press switch 2 in the direction of the arrow A, remove the switch.
Upholstery
Installation is carried out in the reverse order of removal.
The original article is available on the online resource audimanual