Table of contents: Removal ↓ Installation ↓
Removal
1. Remove lever –1–, refer to subsection Removal and installation, checking and adjustment of the final position of the windshield wiper arms and to the illustration.
2. Remove the sealing rubber –2–.
3. Carefully pry and lift the windshield defroster duct at the edge of the glass.
4. Disconnect the nozzle connections on the back of the windshield heating duct
5. Remove the air duct.
6. Press the stopper with a small screwdriver (arrow on the illustration) and at the same time press lightly on the connecting element.
7. Remove the nozzle (A) from the windshield heater.
Installation
1. Press the nozzle into the windshield heating duct and secure it in place.
2. Install the heating, put it on the connection nozzles from the back side.
3. Install the heating on the edge of the glass and install the levers, refer to the subsection Removal and installation, checking and adjustment of the final position of the windshield wiper arms.
4. Install the sealing rubber.
The original text of the material can be found on the website: AUDIMANUAL.RU