Table of contents: Removal ↓ Installation ↓
Fig. 16–38. Glove box: 1 – glove compartment lock cylinder; 2 – locking mechanism; 3 – bolt; 4 – glove box lock cable; 5 – self-locking nut; 6 – glove compartment lock; 7 – bracket; 8 – storage box; 9, 10 – bolts, 2.5 Nm
The glove box with a lock is shown in Fig. 16–38.
Removal
Open the glove compartment.
Fig. 16–39. Location of glove box mounting screws
Loosen the glove box mounting screws (Fig. 16–39).
Move the glove box back out of the guides.
Disconnect the electrical connectors and place the box in the passenger footwell.
Fig. 16–40. Location of glove box lock mounting nuts
Unscrew the nuts and remove the glove compartment lock (Fig. 16–40).
Installation
Installation is carried out in the reverse order of removal, taking into account the following.
If the glove box does not close or is located with a gap, adjust the lock by moving it in the holes of larger diameter.
(The original publication in its entirety is posted on the website: audimanual)