The tool kit, jack and towing hitch* are located in the spare wheel well under the luggage compartment flooring.
The flooring can be raised using a loop and hung from the underside of the luggage compartment flap.
The tool kit includes the following tools:
- wheel wrench,
- screwdriver with adjustable rod,
- spanner 10 x 13 mm,
- safety pin for changing a wheel,
- plastic clamp for removing protective caps of wheel bolts*,
- wire puller for full-size wheel caps,
- crank handle for emergency closing of the sliding and lifting roof panel*.
Before placing the jack down, return the lifting arm to its original lower position.
Warning: The jack included in the kit is intended for changing wheels on your vehicle model only. Never use it to lift heavier vehicles or other loads!
Warning: To avoid accidents, never start the engine on a jacked-up vehicle!
Warning: When working under a vehicle, it must be securely supported on suitable supports.
The hex key in the screwdriver handle makes it easier to loosen and tighten bolts when changing wheels, especially those with alloy wheels. Never use this plastic tool to loosen or tighten wheel bolts.